Free Technical Advice
100's Of Colours
Secure Checkout
SKU N/A Category

KONTA INTERIOR PAINT

$30.00 – $600.00

Product Description

It is an ultra-luxurious water-based interior emulsion with a smooth touch. Recommended for interior masonry surfaces.

Application Description

After surface preparation apply 3-4 coats of KONTA INTERIOR PAINT. Ensure 3-4 hours for drying between successive coats. Use of any other paint apart from specially formulated KONTA INTERIOR PAINT may deviate from the desired finish and make it hard to recondition. STIR THOROUGHLY BEFORE USE. Contains no added lead or mercury.

Health & Safety

Keep out of the reach of children. Do not breathe solvent vapor/spray. Use only in well-ventilated areas. Safety data sheet available for professional users on request. Contains HETEROCYCLIC AMINE PESTICIDE. May produce an allergic reaction. Avoid contact with skin or eyes. If swallowed seek medical advice immediately and show this container or label. Treatments such as sanding, burning off, etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well-ventilated areas. Use suitable personal protection equipment. Do not empty into drains. Do not use empty containers for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Keep away from food, drinks, and animal feed. Store in a cool and shaded place. The container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to the environment. Dispose of used containers in compliance with local regulations.

Tips & Advice

  • 1. Preparing the Surfaces
  • New or Bare Surfaces: New or bare surfaces must be clean, dry, and free from efflorescent salts. Remove all loose, defective, or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dusting off. Treat any areas affected by mold, lichens, algae & moss with bleach. Apply primer on a wall putty before application of topcoat. Previously Painted Sound Surfaces: Remove all loose, defective, or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dusting off. Spot prime and fill the surface as described above if required. Powdery, Dusty, and Cracked Surfaces: Make good minor defects. For larger holes and cracks, use sand and cement mixture. Allow the surface to dry. Prepare the surface as described above.
  • 2. Cleaning
  • Clean all equipment with clean water immediately after use
  • 3. Storing

Store paint in dry conditions and protect from extreme temperatures. The container must be in a secure, upright position and be tightly closed.

Related Products

Related products